Read pattern in GGT
1.Input one pattern
Put cursor on “start reading “ of digitizer menu and press A; put cursor on style name, pattern name(for example style name 123,pattern name “back”), press A at the same time press”*”; Press A at the same time press”*” on pattern sort(X2); Press A at the same time press”*”on pattern description. ( Confirm it is two pieces of X2)
2: Read “Grading table”: Put cursor on grading table name of digitize menu, For example KUZI, press A at the same time press”*”.
3: Read pattern
3.1.; Read Guideline: press A and A in two direction of guideline, then press “*” to finish read guideline.
3.2:: Read out line: Press AB1 on start point; Corner point, curve grading point, Press AB2、AB3…If degree is equal or more than 90 degree, Press AB2D9, For example shoulder point( 2、3is grading point in clockwise);curve line press A, if there are notch on curve line, Press AB2C1,(C1 is notch); then put cursor on singal pattern close or symmetry close of menu , Press A at the same time press”*” . The last put cursor on “finish reading” and Press A to exitReadingpattern.
4：Read nesting pattern
4.1Process one and two is the same as above one and two process.
4.2Read Guideline: press A and A in two direction of guideline, then press “*” to finish read guideline. Then press AB1 on basic size grading point; Then Press “#” on other size , The order is from small size to big size. (note: No matter How many size, we can only read “#” two times, one is small near basic size, one is big near basic size, Others can appear automatically in system, you can change grading value in system).
The last press A on curve point, every 3-4cmread one pint, notch on Grading point of curve line press ABC1, Then press “#” in small and big size near basic size.
notch on ungrading point of curve line , press A at the same time press”*”. The last put cursor on “finish reading” and Press A to exitReadingpattern.
Note: The pattern which is input to system, need to deal with in system ,Then appear pattern file.